Enterasys SmartSwitch 6000 Guide d'installation télécharger pdf (Page 46)

5-2 SmartSwitch 6A000 Installation and Setup Guide

Technical Specifications Specifications

Note The ‘MON' and ‘DIAG' functions are not used in this release.

5.2 TECHNICAL SPECIFICATIONS

Table 5-1 Front panel LEDs

LED Function

FAIL (red) Normally OFF; ON indicates CPU failed.

STATUS

(amber)

Normally OFF; ON indicates an error condition that prevents alarm information from being

displayed to the console.

POWER

(green)

Normally ON; OFF indicates the CPU is not receiving power from the power supply.

RX DATA

(green)

Normally FLASHING intermittently if there is receive activity on the port; indicates the Ethernet

port is up and receiving Ethernet frames.

TX DATA

(green)

Normally FLASHING intermittently if there is transmit activity on the port; indicates the Ethernet

port is up and transmitting Ethernet frames.

Table 5-2 Hardware Specifications

Specification Value

Processor i960CF, 33 MHz

Switching engine 2.5 Gbps, non-blocking

Max I/O ports 7 for 6A000-02; 15 for 6A000-04

Switch latency 10 microseconds

CPU DRAM memory 32 MB

Buffer memory (cells) 32 K

flash memory 8 MB

Serial port RS-232c compliant; RJ-45 connector

Ethernet port IEEE 802.3 compliant; RJ-45 connector

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 52

Pas de commentaire

Enterasys SmartSwitch 6000 Guide d'installation Page 46