Enterasys 2E253-49R Guide de l'utilisateur télécharger pdf (Page 370)

Example 6, Locking a MAC Address to a Port Using Classification Rules

12-38 VLAN Operation and Network Applications

2. Assign Port 1 and 2 to the Red VLAN and set the ports to handle untagged frames as follows:

• The Red VLAN is selected from the Static VLAN Configuration screen to display the Static

VLAN Egress Configuration screen.

• The following are set using the Static VLAN Egress Configuration screen:

– Port 1, Egress: UNTAGGED

– Port 2, Egress: UNTAGGED

No other ports are assigned to the Red VLAN and the exiting ports are left in the default

setting of NO.

3. Remove all ports from the Default VLAN Egress List as follows:

• The Default VLAN is selected from the Static VLAN Configuration screen to display the

Static VLAN Egress Configuration screen. The following is set using the Static VLAN

Egress Configuration screen:

SET ALL PORTS: NO

This configuration setting will cause the untagged frames sent to the Default VLAN from Ports

1 and 2 to be dropped because Ports 1 and 2 have been deleted from the Egress list of the Default

VLAN.

4. Create two source (src) MAC address classification rules and apply them to the Red VLAN

(VID 2), the following settings are entered using the VLAN Classification Configuration screen:

For the Red VLAN and Port 1:

• VID: 2

• Classification: src MAC Address

• Subclassification/MAC Address: 00.00.00.00.00.0A

• ADD the rule. It will display in the top half of the VLAN Classification Configuration screen.

1 2 ... 365 366 367 368 369 370 371 372 373 374 375 ... 389 390

Pas de commentaire

Enterasys 2E253-49R Guide de l'utilisateur Page 370