Enterasys RoamAbout 3000 Manuel d'utilisateur télécharger pdf (Page 12)

Step Description

This section presents the RADIUS Server configuration.

• Click Radius from left panel to enter the radius server information as shown below.

• Enter IP address 50.1.1.50 for primary RADIUS Server.

• Leave port number 1812 as default settings.

• Since only one RADIUS server is used in this configuration, leave IP address 0.0.0.0

in the field for the Secondary RADIUS Server.

• Enter shared key, 1234567890 is used in this case, in Key field. This Key is shared

between the Wireless Access Point and the Radius Server while authenticating the

supplicant (Note the Key entered here must match the key entered in the RADIUS

Server.).

• Click Apply.

SZ; Reviewed:

GAK 4/22/2005

Solution & Interoperability Test Lab Application Notes

12 of 27

Enterasys-IPO.doc

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 26 27

Pas de commentaire

Enterasys RoamAbout 3000 Manuel d'utilisateur Page 12