Enterasys RoamAbout Guide d'installation télécharger pdf (Page 40)

Access Point Configuration

3-6

Using Web Management

Notes:

• The default username is admin, and the default password is password.

• To get help, click on Help, located at the bottom of the screen.

• You must click on the Apply button, located at the bottom of the each Web

interface page for the configuration to take effect.

To use the Web interface to minimally configure the access point, follow these steps:

1. Open a Web browser and enter the access point’s IP address in the address

field:

• If your access point uses a DHCP assigned IP address, make sure the access

point is connected to your network, and enter the DHCP assigned IP address

in your browser’s address field. Use your DHCP server, or other utility, to

determine the access point’s IP address.

• If your access point uses a static IP address, connect a system to the access

point’s Ethernet port and enter the default IP address: http://192.168.1.1/ in

your browser’s address field.

The access point’s Login window appears.

2. Enter the default username admin and the default password password, and

click LOGIN.

• If applicable, the Country Code page appears, go to step 3.

• If the Country Code page does not appear, go to step 4.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 71 72

Pas de commentaire

Enterasys RoamAbout Guide d'installation Page 40