Enterasys 5G1XX Guide de l'utilisateur télécharger pdf (Page 84)

Configuring Bridge MIB Extensions

7-24 Device Control Menu Screens

Parameter Description

Extended Multicast Filtering

Services

Indicates if the filtering of individual multicast addresses

based on Multicast Registration Protocol is active.

NOTE: This function is not available for the current

firmware release.

Traffic Classes Indicates if the mapping of user priorities to multiple traffic

classes function is active. (For configuration information,

refer to Section 7.10.)

Static Entry Individual Port Indicates if the static filtering for unicast and multicast

addresses function is active. (For configuration information,

refer to Section 7.16.)

Configurable PVID Tagging Allows you to override the default PVID setting (Port

VLAN ID used in frame tags) and its egress status

(VLAN-Tagged or Untagged) on each port. For details, refer

to Section 7.15.

Local VLAN Capable This switch does not support multiple local bridges (that is,

multiple Spanning Trees).

VLAN Learning Allows you to select the VLAN Learning mode (IVL or

SVL) used by the switch.

IVL (Independent VLAN Mode) – Allows addresses to

be learned per VLAN.

SVL (Shared VLAN Mode) – Allows a single address for

all VLANs.

Auto VLAN Backplane

Configuration

Enables or disables the ports on the backplane to support

automatic configuration of VLANs. The default is Enabled.

When set to Disabled, you must configure VLANs

manually. For information on how to configure VLANs

manually, refer to Section 7.15.

Host VLAN ID Allows you to enter the Host VLAN ID and it is not limited

to the default VLAN (1).

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 143 144

Pas de commentaire

Enterasys 5G1XX Guide de l'utilisateur Page 84