Enterasys Vertical Horizon VH-8G Spécifications télécharger pdf (Page 25)

9033640 VH-8G User Interface 17

Configuring the Serial Port

You can access the on-board configuration program by attaching a VT100

compatible device to the switch’s serial port. (For more information on

connecting to this port, see “Required Connections” on page 1.) The

communication parameters for this port can be accessed from the Serial

Port Configuration screen shown below and described in the following

table.

Figure 2-11. Serial Port Configuration

Vertical Horizon Local Management -- VH-8G

Serial Port Configuration

Management Mode : CONSOLE MODE

Baudrate : 19200

Databits : 8

Stopbits : 1

Parity : NONE

Time-Out (in minutes) : 10

Auto Refresh (in seconds) : 5

Use <TAB> or arrow keys to move, <Space> to scroll options.

Parameter Default Description

Management Mode Console Mode Indicates that the console port settings are for

direct console connection.

Baud Rate Auto The rate at which data is sent between devices.

Options : 2400, 4800, 9600, 19200 bps, and Auto

detection

Databits 8 bits Sets the data bits of the RS-232 port.

Options : 7, 8

Stopbits 1 bit Sets the stop bits of the RS-232 port.

Options : 1, 2

Parity none Sets the parity of the RS-232 port.

Options : none/odd/even

Time-Out 10 minutes If no input is received from the attached device

after this interval, the current session is

automatically closed.

Range : 0 - 100 minutes; 0: disabled

Auto Refresh 5 seconds Sets the interval before a console session will

auto refresh the console information, such as

Spanning Tree Information, Port Configuration,

Port Statistics, and RMON Statistics.

Range : 5-255 seconds; 0: disabled

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 109 110

Pas de commentaire

Enterasys Vertical Horizon VH-8G Spécifications Page 25