Enterasys Vertical Horizon VH-8G Spécifications télécharger pdf (Page 79)

9033640 Configuring & Monitoring the Switch 71

Downloading Via TFTP

To perform a TFTP download, you must first configure the VH-8G switch.

This consists of programming the switch with an IP address, if this has not

already been done, and entering the IP address of the TFTP server and

the name of the upgrade file. To program the switch IP address, select the

Management Setup Menu from the Main Menu screen, then select

Network Configuration.

To download switch software via TFTP, do the following:

1. Select Download Server IP Address from the TFTP Download Menu.

2. Enter the TFTP server IP address and press [Enter].

3. Select Download Filename and enter the file name to be downloaded

from the TFTP server.

4. If necessary, configure the address of an IP gateway to reach the

server from the switch using the Gateway IP field in the Network

Configuration: IP Configuration menu.

5. Configure the TFTP server by copying the download file from the

upgrade disk to an appropriate directory and starting the server.

6. Select Process TFTP Download and press [Enter].

To verify that the TFTP download has been successfully completed,

note the software version level displayed on the Switch Information

screen accessible from the System Information Menu. This number

should match the version number that appears on the upgrade disk.

For a TFTP download, the path to the file must be included in

its name. For example, if the upgrade file name is

filename.bin and it resides in the directory /usr/tftp on the

TFTP server, then you must enter the TFTP file name as:

“/usr/tftp/filename.bin”.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 109 110

Pas de commentaire

Enterasys Vertical Horizon VH-8G Spécifications Page 79