Enterasys 802.1Q Manuel d'utilisateur télécharger pdf (Page 14)

Assigning Port VLAN IDs (PVIDs) and Ingress Filtering

14-14 802.1Q VLAN Commands

set port discard

Thiscommandsetstheframediscardmodeononeormoreports.

Syntax

set port discard port-string {tagged | untagged | none | both}

Parameters

Defaults

Bydefault,noframesarediscardedbasedonreceivedformat.

Mode

Switchcommand,read‐write.

Example

ThisexamplesetsGigabitEthernetport7inslot5todiscardbothtaggedanduntaggedframes:

matrix-x(switch-su)#set port discard ge.5.7 both

clear port discard

Thiscommandresetstheframediscardmodetothefactorydefaultsetting(none).

Syntax

clear port discard port-string

Parameters

Defaults

None.

Mode

Switchcommand,read‐write.

Example

ThisexampleresetsGigabitEthernetport7inslot5tothedefaultdiscardmodeof“none”:

matrix-x(switch-su)# clear port discard ge.5.7

port‐string Specifiestheport(s)forwhichtosetframediscardmode.

tagged|untagged

|none|both

Setstheport(s)todiscardtaggedoruntaggedframes,noframes,orboth

typesofframes.

port‐string Specifiestheport(s)forwhichtoresetframediscardmode.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Pas de commentaire

Enterasys 802.1Q Manuel d'utilisateur Page 14