Enterasys 802.1Q Manuel d'utilisateur télécharger pdf (Page 7)

Assigning Port VLAN IDs (PVIDs) and Ingress Filtering

Matrix X Router Command Line Interface Reference Guide 14-7

set port vlan

ThiscommandconfiguresthePVID(portVLANidentifier)foroneormoreports.

Syntax

set port vlan port-string pvid

Parameters

Defaults

None.

Mode

Switchcommand,read‐write.

Usage

ThePVIDisusedtoclassifyuntaggedframesastheyingressintoagivenport.Ifthespecified

VLANhasnotalreadybeencreated,thiscommandwillcreateit,addtheVLANtotheport’s

egresslistasuntagged,andremovethedefaultVLANfromtheport’segresslist.

Example

ThefollowingexampleaddsGigabitEthernetport10inslot1totheportVLANlistofVLAN4

(PVID4).SinceVLAN4isanewVLAN,itiscreated.Thenportge.1.10isaddedtoVLAN4’s

untaggedegresslist,andisclearedfromtheegresslistofVLAN

1(thedefaultVLAN):

matrix-x(switch-su)#set port vlan ge.1.10 4

matrix-x(switch-su)#set vlan 4 create

matrix-x(switch-su)#set vlan egress 4 ge.1.10 untagged

matrix-x(switch-su)#clear vlan egress 1 ge.1.10

port‐string Specifiestheport(s)forwhichtoconfigureaVLANidentifier.

pvid SpecifiestheVLANIDoftheVLANtowhichport(s)willbeadded.

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Pas de commentaire

Enterasys 802.1Q Manuel d'utilisateur Page 7