Enterasys 802.1Q Manuel d'utilisateur télécharger pdf (Page 9)

Assigning Port VLAN IDs (PVIDs) and Ingress Filtering

Matrix X Router Command Line Interface Reference Guide 14-9

show vlan interface

ThiscommanddisplaystheMIB‐IIinterfaceentrymappedtoaVLAN.

Syntax

show vlan interface [vlan-list]

Parameters

Defaults

Ifvlan‐listisnotspecified,MIB2interfaceentrieswillbedisplayedforallVLANs.

Mode

Switchcommand,read‐only.

Example

ThisexampledisplaystheinterfaceentryforVLAN1:

matrix-x(switch-su)#show vlan interface 1

VLAN Port Storage Type

-------------------------------------

1 vlan.0.1 non-volatile

Thefollowingtableprovidesanexplanationofthecommandoutput.

vlan‐list DisplaystheMIB2interfaceentryforspecificVLAN(s).

Output What It Displays...

VLAN VLAN ID.

Port Port-string designation.

Storage Type Whether the entry is stored as a volatile or non-volatile entry. Volatile entries are

lost when a system is reset. Non-volatile entries are saved in NVRAM and are

persistent until cleared.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Pas de commentaire

Enterasys 802.1Q Manuel d'utilisateur Page 9