Enterasys 5C105 Guide d'installation télécharger pdf (Page 49)

Connecting to the Network

3-21

Figure 3-12 Example of Cable Placement When Using Optional RJ21 Angle Adapters

4. Verify that a link exists by checking that the port Link LEDs ➃ shown in Figure 3-10 are

flashing amber, blinking green, or solid green. If any of the Link LEDs are off, perform the

following steps until they are on:

a. Verify that the device at the other end of the twisted pair segment is ON and connected to

the segment.

b. Verify that the RJ21 connectors on the twisted pair segment have the proper pinouts and

check the cable for continuity.

c. Check that the twisted pair connection meets the specifications in the Cabling Guide.

If a link is not established, contact Enterasys Networks. Refer to “Getting Help” in About This

Guide for details.

5. Repeat all the steps above until all RJ21 connections are made.

3677_08

GROUP

SELECT

CPU

11X

23X

13X

35X

25X

47X

37X

GROUP

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 77 78

Pas de commentaire

Enterasys 5C105 Guide d'installation Page 49